TROUBLESHOOTING GUIDE
What is my IP address? Public and private IP addresses explained
Your public IP address is the address websites see when you connect to them. Our What is my IP page shows it instantly. It usually identifies your internet provider and an approximate area, not your exact location or identity.
Reviewed
Likely causes
Every device on the internet needs an address so replies can find their way back. Your router gives each device a private address that only works inside your home or office network, then shares one public address for all of them. Mobile networks, VPNs and work networks each provide their own public addresses, so the address websites see depends on how you are connected.
Steps for visitors
Change one thing at a time. Keep certificate warnings, firewalls and other security protections in place. Ask your administrator before changing a managed network.
See your public IP address
Open our What is my IP page on the device and connection you want to check. It shows the address our server sees, and whether it is IPv4 or IPv6.
What the result means: This is the address websites and online services see for this connection. Repeat the check if you change network, because the address can change.
Find your private IP address
On Windows, open Settings, then Network and internet, then the properties of your connection. On a phone, open the Wi-Fi details for the network you are using. Addresses beginning 10., 172.16 to 172.31, or 192.168 are private.
What the result means: A private address identifies the device inside your network only. If it differs from the public address, your router is translating between the two, which is normal.
Compare Wi-Fi with mobile data
Check your public address on Wi-Fi, then switch the same phone to mobile data and check again.
What the result means: Different addresses are expected: each connection has its own provider. This is useful evidence when a website works on one connection but not the other.
Check the effect of a VPN or relay
If you use a VPN, a work proxy or a privacy relay, compare your public address with it switched on and off, where your organisation allows it.
What the result means: If the address changes, websites see the VPN or relay rather than your own connection. A website that blocks that address may then fail to load.
Note IPv4 and IPv6
If the address contains colons, such as 2001:db8::1, it is IPv6. Four numbers separated by dots, such as 203.0.113.5, is IPv4.
What the result means: Many connections have both. Your device picks one for each connection, so the address shown can switch between formats from one visit to the next.
Our What is my IP page shows the address our server sees for your connection. We do not save it for that feature.
If you own the website
If a visitor reports a block, ask for the public IP address shown on our What is my IP page together with the time of the failure. Compare it with firewall, rate-limit and web application firewall logs. Remember that many people may share one mobile or carrier-grade address, so blocking it can affect other visitors.
Who to contact
Contact your internet provider if your public address is listed on a block list or you need a fixed address. Contact the website’s support team if it blocks your address. Do not post your IP address publicly alongside your name or account details.
Sources and further reading
These provider documents support the technical explanations. The comparisons above narrow the investigation; they cannot diagnose every network or service.